Netcomm v220 Configuration Instructions

Please note that you will need to register for AdamTalk before using a Netcomm ATA.

System Requirements:

Processor: Pentium III 700 MHz (or equivalent)
Memory: 128 MB RAM
Hard Disk Space: 30 MB
Operating System: Windows 2000, Windows XP, Mac OS X 10.4
Internet Connection: 256/64 (Minimum) 512/128 or above (Recommended)

Step 1 - Setup
Insert the Netcomm Easy Setup CD into your CD/DVD drive, if you do not have a CD/DVD drive or have lost your disk, you can download a copy of the program from Adam Website here.
It is best to save the software to your desktop, so it is easy to find and run.

If you are using an USB cable to connect your ADSL Modem to your Computer, you will need replace this cable with an Ethernet cable, and follow the step below.

If you have a single port Netcomm NB6 or a Netcomm NB6plus4 or similar, you will need to plug an Ethernet cable from a LAN port on the back of your ADSL Modem, into the WAN port on the back of the Netcomm v220 ATA. You will then need to plug another Ethernet cable from the LAN port on the Netcomm v220 ATA into the Ethernet port on your computer.

If you are using a Wireless Router, you will need to plug an Ethernet cable in the LAN port on the Netcomm v220 ATA into the Ethernet port on your computer. Once configured, you will need to remove the ATA from your computer and plug it into your Wireless Router. Plug an Ethernet cable from a LAN port on the Wireless Router to the WAN port on the ATA.

Once you are confident you have setup your network correctly, please reboot your computer. This will ensure you are assigned an IP address from the Netcomm v220 ATA rather then from your Netcomm ADSL Modem.

Step 2- Running the Configuration Utility

  • When your computer has rebooted, double click the EasySetupAdam.exe file found on the Setup CD.
  • Windows Vista users may also be prompted by the User Account Control dialog. Click Continue to authorise installation.

 

  • The software now run and confirm you have setup your network correctly
  • If there is an error, the following screen will appear otherwise skip the following 2 screen shots.
  • Please note if you do not see this screen, or the screen below, please ignore these steps.
  • Ensure you're network setup is correct, and the Netcomm v220 ATA is plugged into your computer using an Ethernet cable, from the LAN port on the ATA.
  • If you click on the Radio Button for the 'SIP VoIP Gateway' you will be presented with another window with some further trouble shooting steps.
  • Please note if you do not see this screen, or the screen above, please ignore these steps.
  • The image to the left identifies some common issues encountered when configuring a Netcomm v220 ATA, please take the time to ensure the solutions have been tried. If you are unable to progress and are constantly presented with these error screens do not hesitate to contact our Adam Internet HelpDesk on 8423 4000
Step 3 - Configuring X-Lite

 

  • Please fill in your AdamTalk username (without @adam.com.au)
  • Please fill in your AdamTalk password
  • You can tick "Show characters of Password" to ensure you have typed it correctly.

 

  • You can click "Copy Phone 1 details to Phone2" to save time from typing your AdamTalk information out twice.
  • Click "Setup" to continue.
  • The setup software will now configure your Netcomm v220 ATA. Note this may take up to 5 minutes to complete so please be patient.

 
  • When installation is complete, it will prompt you to reboot your computer. You will need to do this to begin browsing the internet again.
  • While your computer is rebooting you can pick up your telephone, and ensure you have dialtone.
  • If your Netcomm v220 ATA has been configured correctly the device will now be registered with the AdamTalk SIP servers. You can configure your AdamTalk settings in the members area located here
  • To ensure your device is registered correctly ensure you have dialtone by picking up your phone handset.
  • If you do not have dialtone, please run through the setup again and ensure you type in your correct AdamTalk details.